Description

The Yamaha 200 hp 2-stroke outboard motor (model series 200A/L200A) features a 90-degree V6 engine with 2596 cc displacement and a carburetor fuel induction system.

Engine Specifications

Specification Details

Engine Type 90 deg. V6

Displacement. 2596 cc

Max. Prop Shaft Output 200 hp. (147.1 kW) @ 5000 r/min

Bore x Stroke 90.0 x 68.0 mm

Fuel Induction System. Carburetor

LubricationSystem Pre-mixed Fuel and Oil

Starting System Electric Starter

Cooling System Water-Cooled

Thermostatically Controlled

Dimensions and Features

Specification Details

Dry Weight 178-186 kg (approx. 392-410 lbs)
Engine Transom Height L: 516 mm (20.3 in), X: 642 mm (25.3 in) (depending on model)
Controls Remote Control
Tilt System Power Trim & Tilt
Full Throttle Operating Range Typically 4500 – 5500 r/min or 5000 – 6000 r/min (depending on specific model/year

• Fuel: The recommended fuel is premium unleaded gasoline (minimum 87 octane, though some sources mention higher octane for performance optimization). Ethanol blend limit is typically 10% maximum.
• Oil: The lubrication system uses a pre-mixed fuel and oil system (or semi-automatic oil injection on some models). Use only approved 2-stroke marine oil. The specific fuel/oil mix ratio will be detailed in the owner’s manual.
• Fuel Consumption: Expect approximately 10-15 gallons per hour (GPH) at full throttle, though this varies greatly with boat hull, load, and sea conditions. Cruising speeds might see consumption around 8 GPH.